COPPER PIPE FITTINGS

COPPER PIPE FITTINGS
Expiry Review No. RR-2015-003

TABLE OF CONTENTS

 

NOTICE OF EXPIRY REVIEW OF ORDERS

The Canadian International Trade Tribunal (the Tribunal) hereby gives notice that it will, pursuant to subsection 76.03(3) of the Special Import Measures Act (SIMA), initiate an expiry review of its orders made on February 17, 2012, in Expiry Review No. RR-2011-001, continuing, without amendment, its findings made on February 19, 2007, in Inquiry No. NQ-2006-002, concerning the dumping of solder joint pressure pipe fittings and solder joint drainage, waste and vent pipe fittings, made of cast copper alloy, wrought copper alloy or wrought copper, for use in heating, plumbing, air conditioning and refrigeration applications (copper pipe fittings), originating in or exported from the United States of America, the Republic of Korea and the People’s Republic of China, and the subsidizing of such goods originating in or exported from the People’s Republic of China, restricted to the products enumerated in the appendix (the subject goods). The orders are scheduled to expire on February 16, 2017.

In this expiry review, the Canada Border Services Agency (CBSA) will first determine whether the expiry of the orders in respect of the subject goods is likely to result in the continuation or resumption of dumping and/or subsidizing of the subject goods. If the CBSA determines that the expiry of the orders in respect of any goods is likely to result in the continuation or resumption of dumping and/or subsidizing, the Tribunal will then conduct an expiry review to determine if the continued or resumed dumping and/or subsidizing are likely to result in injury. The CBSA must provide notice of its determinations within 120 days after receiving notice of the Tribunal’s decision to initiate an expiry review, that is, no later than July 20, 2016. The Tribunal will issue its order no later than November 28, 2016, and its statement of reasons no later than December 12, 2016.

Each person or government wishing to participate in this expiry review must file a notice of participation with the Tribunal on or before August 4, 2016. Each counsel who intends to represent a party in the expiry review must file a notice of representation, as well as a declaration and undertaking, with the Tribunal on or before August 4, 2016.

The schedule for this expiry review is found at www.citt-tcce.gc.ca.

The Tribunal will hold a public hearing relating to this expiry review in the Tribunal’s Hearing Room No. 1, 18th Floor, 333 Laurier Avenue West, Ottawa, Ontario, commencing on the 11th day of October 2016, at 9:30 a.m., to hear evidence and representations by interested parties.

In accordance with section 46 of the Canadian International Trade Tribunal Act, a person who provides information to the Tribunal and who wishes some or all of the information to be kept confidential must, among other things, submit a non-confidential edited version or summary of the information designated as confidential, or a statement indicating why such a summary cannot be made.

Written submissions, correspondence and requests for information regarding the Tribunal’s portion of this matter should be addressed to the Registrar, Canadian International Trade Tribunal Secretariat, 15th Floor, 333 Laurier Avenue West, Ottawa, Ontario K1A 0G7, 613-993-3595 (telephone), 613-990-2439 (fax), citt‑tcce@tribunal.gc.ca (e-mail).

Further details regarding this expiry review, including the schedule of key events, are contained in the documents entitled “Additional Information” and “Expiry Review Schedule” appended to the notice of commencement of expiry review available on the Tribunal’s Web site at www.citt-tcce.gc.ca/en/dumping-and-subsidizing/expiry-reviews-section-76....

Dated at Ottawa, Ontario,
this 22nd day of March 2016

ADDITIONAL INFORMATION

BACKGROUND INFORMATION

Notice of Expiry No. LE-2015-003, issued on February 1, 2016, informed interested persons and governments of the impending expiry of the Tribunal’s orders in Expiry Review No. RR-2011-001 concerning the dumping and subsidizing of the subject goods. On the basis of the information filed during the expiry process, the Tribunal is of the opinion that an expiry review of the orders is warranted.

In this expiry review, the CBSA will first conduct investigations to determine whether the expiry of the orders in respect of the subject goods is likely to result in the continuation or resumption of dumping and/or subsidizing of the subject goods. To this end, the CBSA will send questionnaires to domestic producers, importers and foreign producers to gather information for its investigations. Further information regarding the CBSA’s investigations can be obtained by contacting Mr. Kevin Lambertsen, Canada Border Services Agency, 11th Floor, 100 Metcalfe Street, Ottawa, Ontario K1A 0L8, 613-954-1641 (telephone), Kevin.Lambertsen@cbsa-asfc.gc.ca (e-mail). A copy of the CBSA’s investigations schedule is available on the CBSA’s Web site at www.cbsa-asfc.gc.ca/sima-lmsi/er-rre/menu-eng.html.

If the CBSA determines that the expiry of the orders in respect of any goods is likely to result in the continuation or resumption of dumping and/or subsidizing, the Tribunal will then conduct an expiry review, pursuant to the provisions of SIMA and its Expiry Review Guidelines, to determine if the continued or resumed dumping and/or subsidizing of the subject goods are likely to result in injury. Upon receipt of the CBSA’s determinations, if any, of a likelihood of continued or resumed dumping and/or subsidizing, the Tribunal will issue other questionnaires to domestic producers, certain importers and foreign producers to gather information for the purposes of its expiry review.

The schedule for the Tribunal’s expiry review specifies, among other things, the date for the filing of replies to Tribunal expiry review questionnaires, the date on which information on the record will be made available by the Tribunal to interested parties and counsel that have filed notices of participation or notices of representation and declarations and undertakings, the dates for the filing of submissions by interested parties and the hearing date.

REQUESTS FOR PRODUCT EXCLUSIONS

The Tribunal’s Guideline to Making Requests for Product Exclusions, which can be found on the Tribunal’s Web site at www.citt-tcce.gc.ca/en/g_excl_e, describes the procedure for filing requests for specific product exclusions. Forms are available on the Tribunal’s Web site at www.citt-tcce.gc.ca/en/forms to facilitate the filing of product exclusion requests, responses and replies to responses. Parties may file in a different format if they so wish, provided all the information and supporting documentation requested in the forms are included. Please see the attached schedule for the filing deadlines for the product exclusion process. Parties filing product exclusion requests are requested to contact the Tribunal for additional information on filing and service requirements.

PROCEDURE FOR FILING WITH THE TRIBUNAL

Parties and the public may file documents electronically with the Tribunal through its Secure E‑filing Service at https://apps.citt-tcce.gc.ca/sftapp/CITT/html/transfer_e.html. The information is fully encrypted from the sender to the Tribunal.

Parties must still file paper copies in the required number as instructed. The electronic version and the hard-copy version must be identical. In case of discrepancies, the hard-copy version will be considered the original.

PUBLIC HEARING

The Tribunal will hold a public hearing relating to this expiry review in the Tribunal’s Hearing Room No. 1, 18th Floor, 333 Laurier Avenue West, Ottawa, Ontario, commencing on the 11th day of October 2016, at 9:30 a.m., to hear evidence and representations by interested parties.

OTHER INFORMATION

The Canadian International Trade Tribunal Rules govern these proceedings.

Written and oral communication with the Tribunal may be in English or in French.

The Expiry Reviews Guidelines can be found on the Tribunal’s Web site at www.citt-tcce.gc.ca/en/Expiry_Review_Guidelines_e.

At the end of these proceedings, the Tribunal will issue a decision supported by a summary of the case, a summary of the arguments and an analysis of the case. The decision will be posted on its Web site and distributed to the parties and interested persons, as well as to organizations and persons that have registered to receive decisions of the Tribunal.

EXPIRY REVIEW SCHEDULE

March 22, 2016 - Tribunal issues notice of expiry review and schedule

To be determined - Teleconference on draft questionnaires (if required)

CBSA’s Investigations

March 23, 2016 - Initiation of the CBSA’s expiry review investigations and issuance of the CBSA questionnaires
Initial compilation of CBSA exhibits available

July 20, 2016  - CBSA’s determinations
If determinations are affirmative, information pursuant to the Canadian International Trade Tribunal Rules is transferred to the Tribunal

August 4, 2016  - CBSA statement of reasons issued

Tribunal’s Expiry Review

July 21, 2016 - Initiation of Tribunal’s expiry review (following affirmative determinations by the CBSA)

August 4, 2016 - Notices of participation and representation, declarations and undertakings

August 11, 2016 - Replies to Tribunal expiry review questionnaires

September 8, 2016 - Distribution of Tribunal exhibits, including information transferred from the CBSA, and investigation report

September 8 to 16, 2016 - Requests for information (RFIs)

To be determined - Investigation report teleconference (if required)

September 15, 2016, by noon  - Requests for product exclusions

September 16, 2016, by noon - Cases of parties in support of a continuation of the orders

September 19, 2016, by noon - Objections to RFIs

September 22, 2016, by noon - Tribunal decisions on RFIs

September 23, 2016, by noon  - Domestic producers’ responses to requests for product exclusions

September 27, 2016, by noon  - Cases of parties in opposition to a continuation of the orders

September 30, 2016, by noon  - Requesters’ replies to domestic producers’ responses to requests for product exclusions
Replies to RFIs

October 4, 2016, by noon  - Reply submissions of parties in support of a continuation of the orders

October 11, 2016 - Public hearing

November 28, 2016 - Order issued

December 12, 2016 - Statement of reasons issued

 

APPENDIX

Products Covered by the Tribunal’s Orders made on February 17, 2012, in Expiry Review No. RR‑2011-001

1. - The tables to this appendix list, by product category, the copper pipe fittings that are covered by the Tribunal’s orders. Where an asterisk (*) follows a specific copper pipe fitting description, it indicates that both wrought and cast copper pipe fittings are covered by the Tribunal’s orders.

2. - Copper pipe fittings are identified in terms of imperial measurement, i.e. inches. However, the metric equivalents of the imperial measurement are also covered by the Tribunal’s orders. The term “metric equivalent” refers to those copper pipe fittings that are soft converted equivalents of the imperial-sized copper pipe fittings and does not include fittings that are made specifically in metric dimensions. Copper pipe fittings are also identified in terms of nominal size.

3. - Copper pipe fittings are identified in the tables to this appendix using the following abbreviated terms:

Abbreviation Chart

WP

Wrought Pressure

FTG

Fitting End (Street End)

WD

Wrought Drainage

LT

Long Turn

CP

Cast Pressure

MJ

Mechanical Joint

CD

Cast Drainage

DE

Drop Ear

C

Copper Tube Cupped End or Sweat End

DWV

Drainage Waste, Vent

M

Male NPT Thread

TY

90˚ Drainage Tee

FE

Female NPT Thread

Y

45˚ Drainage Tee

SJ

Slip Joint End

 

 

 

 

Subject Copper Pipe Fittings – Female Adapters

1-1/4 CXFE CD ADAPTER*

1-1/2 FTGXFE CD ADAPTER*

1-1/2 CXFE CD ADAPTER*

1-1/2 X 1-1/4 CXFE CD ADAPTER*

3 FTGXFE CD ADAPTER*

2 CXFE CD ADAPTER*

3 CXFE CD ADAPTER*

4 CXFE CD ADAPTER*

1/2 CXFE CP ADAPTER*

1/2 X 3/8 CXFE CP ADAPTER*

1/2 X 3/4 CXFE CP ADAPTER*

3/4 CXFE CP ADAPTER*

3/4 X 1/2 CXFE CP ADAPTER*

3/4 X 1 CXFE CP ADAPTER*

3/4 X 1-1/4 CXFE CP ADAPTER*

3/4 X 1-1/2 CXFE CP ADAPTER*

1 C X FE CP ADAPTER*

1 X 1/2 CXFE CP ADAPTER*

1 X 3/4 C X FE CP ADAPTER*

1 X 1-1/4 CXFE CP ADAPTER*

1-1/4 CXFE CP ADAPTER*

1-1/4 X 1/2 CXFE CP ADAPTER*

1-1/4 X 3/4 CXFE CP ADAPTER*

1-1/4 X 1 CXFE CP ADAPTER*

3/4 X 1/2 FTGXFE CP ADAPTER*

1 FTGXFE CP ADAPTER*

1-1/2 CXFE CP ADAPTER*

1-1/2 X 3/4 CXFE CP ADAPTER*

1-1/2 X 1 CXFE CP ADAPTER*

1-1/2 X 2 CXFE CP ADAPTER*

2 CXFE CP ADAPTER*

2-1/2 C X FE CP ADAPTER*

3 CXFE CP ADAPTER*

1/2 CXFE CP DROP EAR ADAPTER

3/4 CXFE CP DROP EAR ADAPTER

1/2 CXFE CP HIGH EAR ADAPTER*

4 CXFE CP ADAPTER*

5 C X FE CP ADAPTER*

6 C X FE CP ADAPTER*

1-1/4 CXFE WD ADAPTER*

1-1/4 X 1-1/2 CXFE WD ADAPTER*

1-1/4 FTGXFE WD ADAPTER*

1-1/2 FTGXFE WD ADAPTER*

2 FTGXFE WD ADAPTER*

1-1/2 CXFE WD ADAPTER*

1-1/2 X 1-1/4 CXFE WD ADAPTER*

1-1/2 X 2 CXFE WD ADAPTER*

3 FTGXFE WD ADAPTER*

2 C X FE WD ADAPTER*

2 X 1-1/2 CXFE WD ADAPTER*

3 C X FE WD ADAPTER*

1/4 C X FE WP ADAPTER*

3/8 C X FE WP ADAPTER*

3/8 X 1/4 CXFE WP ADAPTER*

3/8 X 1/2 CXFE WP ADAPTER*

1/2 C X FE WP ADAPTER*

1/2 X 1/4 CXFE WP ADAPTER*

1/2 X 3/8 CXFE WP ADAPTER*

1/2 X 3/4 CXFE WP ADAPTER*

1/2 X 1 CXFE WP ADAPTER*

5/8 X 1/2 CXFE WP ADAPTER*

5/8 X 3/4 CXFE WP ADAPTER*

3/4 C X FE WP ADAPTER*

3/4 X 1/2 CXFE WP ADAPTER*

3/4 X 1 CXFE WP ADAPTER*

3/4 X 1-1/4 CXFE WP ADAPTER*

3/4 X 1-1/2 CXFE WP ADAPTER*

1 C X FE WP ADAPTER*

1 X 1/2 CXFE WP ADAPTER*

1 X 3/4 CXFE WP ADAPTER*

1 X 1-1/4 CXFE WP ADAPTER*

1 X 1-1/2 CXFE WP ADAPTER*

1-1/4 C X FE WP ADAPTER*

1-1/4 C X 3/4 FE WP ADAPTER*

1-1/4 X 1 CXFE WP ADAPTER*

1-1/4 X 1-1/2 CXFE WP ADAPTER*

1-1/4 X 2 CXFE WP ADAPTER*

1/4 FTGXFE WP ADAPTER*

3/8 FTGXFE WP ADAPTER*

3/8 X 1/4 FTGXFE WP ADAPTER*

1/2 FTGXFE WP ADAPTER*

1/2 X 1/4 FTGXFE WP ADAPTER*

1/2 X 3/8 FTG X FE ADAPTER*

1/2 FTG X 3/4 FE WP ADAPTER*

3/4 FTGXFE WP ADAPTER*

3/4 FTG X 1/2 FE WP ADAPTER*

1 FTGXFE WP ADAPTER*

1 FTG X 3/4 FE WP ADAPTER*

1-1/4 FTGXFE WP ADAPTER*

1-1/2 FTGXFE WP ADAPTER*

2 FTGXFE WP ADAPTER*

1-1/2 C X FE WP ADAPTER*

2-1/2 FTGXFE WP ADAPTER*

1-1/2 C X 1 FE WP ADAPTER*

1-1/2 X 1-1/4 CXFE WP ADAPTER*

1-1/2 X 2 CXFE WP ADAPTER*

3 FTGXFE WP ADAPTER*

2 C X FE WP ADAPTER*

2 X 1 C X FE WP ADAPTER*

2 X 1-1/4 CXFE WP ADAPTER*

2 X 1-1/2 CXFE WP ADAPTER*

2-1/2 C X FE WP ADAPTER*

3 C X FE WP ADAPTER*

 

 

Subject Copper Pipe Fittings – Male Adapters

1-1/4 CXM CD ADAPTER*

1-1/4X1-1/2 CXM CD ADAPTER*

1-1/2 FTGXM CD ADAPTER*

1-1/2 CXM CD ADAPTER*

1-1/2X1-1/4 CXM CD ADAPTER*

2 CXM CD ADAPTER*

2 X 1-1/2 CXM CD ADAPTER*

3 CXM CD ADAPTER*

4 CXM CD ADAPTER*

1/2 CXM CP ADAPTER*

1/2 X 3/4 CXM CP ADAPTER*

3/4 CXM CP ADAPTER*

3/4 X 1/2 CXM CP ADAPTER*

3/4 X 1-1/4 CXM CP ADAPTER*

1 CXM CP ADAPTER*

1 X 1/2 CXM CP ADAPTER*

1 X 1-1/4 CXM CP ADAPTER*

1 X 1-1/2 CXM CP ADAPTER*

1-1/4 CXM CP ADAPTER*

1-1/4 X 1/2 CXM CP ADAPTER*

1-1/4 X 1 CXM CP ADAPTER*

1-1/2 CXM CP ADAPTER*

1-1/2 X 3/4 CXM CP ADAPTER*

2 CXM CP ADAPTER*

2 X 1-1/2 C X M CP ADAPTER*

2-1/2 CXM CP ADAPTER*

3 CXM CP ADAPTER*

4 CXM CP ADAPTER*

5 CXM CP ADAPTER

6 CXM CP ADAPTER

1-1/2 M X 1-1/2 WD ADAPTER*

1-1/4 CXM WD ADAPTER*

1-1/4X1-1/2 CXM WD ADAPTER*

1-1/2 FTGXM WD ADAPTER*

2 FTGXM WD ADAPTER*

1-1/2 CXM WD ADAPTER*

1-1/2 X 1-1/4 CXM WD ADAPTER*

1-1/2 X 2 CXM WD ADAPTER*

2 CXM WD ADAPTER*

2 X 1-1/2 CXM WD ADAPTER*

3 CXM WD ADAPTER*

4 CXM WD ADAPTER*

1-1/4 CXM WD FLUSH TRAP ADAPTER*

1-1/2 CXM WD FLUSH TRAP ADAPTER*

2 CXM WD FL TRAP ADAPTER*

1-1/2 CXM WD SCULLY BUSHING*

2 CXM WD SCULLY BUSHING*

1/4 CXM WP ADAPTER*

1/4 X 3/8 CXM WP ADAPTER*

1/4 X 1/2 CXM WP ADAPTER*

3/8 CXM WP ADAPTER*

3/8 X 1/4 CXM WP ADAPTER*

3/8 X 1/2 CXM WP ADAPTER*

1/2 CXM WP ADAPTER*

1/2 X 1/4 CXM WP ADAPTER*

1/2 X 3/8 CXM WP ADAPTER*

1/2 X 3/4 CXM WP ADAPTER*

1/2 X 1 CXM WP ADAPTER*

5/8 X 1/2 CXM WP ADAPTER*

5/8 X 3/4 CXM WP ADAPTER*

3/4 CXM WP ADAPTER*

3/4 C X 3/8 WP M ADAPTER*

3/4 X 1/2 CXM WP ADAPTER*

3/4 X 1 CXM WP ADAPTER*

3/4 X 1-1/4 CXM WP ADAPTER*

3/4 X 1-1/2 CXM WP ADAPTER*

1 CXM WP ADAPTER*

1 X 1/2 CXM WP ADAPTER*

1 X 3/4 CXM WP ADAPTER*

1 X 1-1/4 CXM WP ADAPTER*

1 X 1-1/2 CXM WP ADAPTER*

1 X 2 CXM WP ADAPTER*

1-1/4 CXM WP ADAPTER*

1-1/4 X 3/4 CXM WP ADAPTER*

1-1/4 X 1 CXM WP ADAPTER*

1-1/4 X 1-1/2 CXM WP ADAPTER*

1-1/4 X 2 CXM WP ADAPTER*

1/4 FTGXM WP ADAPTER*

3/8 FTGXM WP ADAPTER*

1/2 FTGXM WP ADAPTER*

1/2 X 3/8 FTGXM WP ADAPTER*

1/2 X 3/4 FTGXM WP ADAPTER*

3/4 FTGXM WP ADAPTER*

3/4 X 1/2 FTGXM WP ADAPTER*

1 FTGXM WP ADAPTER*

1 X 3/4 FTGXM WP ADAPTER*

1-1/4 FTGXM WP ADAPTER*

1-1/2 FTGXM WP ADAPTER*

2 FTGXM WP ADAPTER*

1-1/2 CXM WP ADAPTER*

2-1/2 FTGXM WP ADAPTER*

1-1/2 X 1 CXM WP ADAPTER*

1-1/2 X 1-1/4 CXM WP ADAPTER*

1-1/2 X 2 CXM WP ADAPTER*

3 FTG X M WP ADAPTER*

2 CXM WP ADAPTER*

2 X 1-1/4 CXM WP ADAPTER*

2 X 1-1/2 CXM WP ADAPTER*

2 X 2-1/2 C X M WP ADAPTER*

2-1/2 CXM WP ADAPTER*

2-1/2 X 2 CXM WP ADAPTER*

3 CXM WP ADAPTER*

4 CXM WP ADAPTER*

1/2 X 3/4 C X HOSE WP ADAPTER*

 

Subject Copper Pipe Fittings – Other Adapters

1-1/4 X 2 CXSP CD FERRULE*

1-1/2 X 2 CXSP CD FERRULE*

1-1/2 X 3 CXSP CD FERRULE*

2 CXSP CD FERRULE*

2 X 3 CXSP CD FERRULE*

2 X 4 CXSP CD FERRULE*

3 CXSP CD FERRULE*

3 X 4 CXSP CD FERRULE*

4 CXSP CD FERRULE*

3 X 4 CXSP CD ECCENTRIC FERRULE*

1-1/4 X 2 CXMJ CD ADAPTER*

1-1/4 X 3 CXMJ CD ADAPTER*

1-1/2 X 2 CXMJ CD ADAPTER*

1-1/2 X 3 CXMJ CD ADAPTER*

1-1/2 X 4 CXMJ CD ADAPTER*

2 X 3 CXMJ CD ADAPTER*

2 X 4 CXMJ CD ADAPTER*

3 CXMJ CD ADAPTER*

3 X 4 CXMJ CD ADAPTER*

4 CXMJ CD ADAPTER*

6 C X M J CD ADAPTER*

1-1/4 FTGXSJ CD ADAPTER*

4 ACT(3S)X1-1/2C-30 CD ROOF ADAPTER*

4 ACT(3S) X 2C-30 CD ROOF ADAPTER*

4 SOIL(5A)X 1-1/2 C CD ROOF ADAPTER*

4 SOIL(5A)X 2 C CD ROOF ADAPTER*

5ACT 4SX 3C CD ROOF ADAPT CALGARY*

5S X 3C CD ROOF ADAPT REGINA*

1-1/2 SJXODX3/4M/1/2FE CD CONDENSATE TEE

2 C X SJ CD ADAPTER*

2 C X MJ WD ADAPTER*

1-1/4 FE X SJ WD ADAPTER*

1-1/2 FE X SJ WD ADAPTER*

1-1/2 X1-1/4 FE X SJ WD ADAPTER*

1-1/4 FTG X SJ WD ADAPTER*

1-1/2 FTG X SJ WD ADAPTER*

1-1/2 X 1-1/4 FTG X SJ ADAPTER*

1-1/4 M X SJ WD ADAPTER*

1-1/2 M X SJ WD ADAPTER*

1-1/2 X 1-1/4 M X SJ WD ADAPTER*

1-1/4 C X SJ WD ADAPTER*

1-1/4 X 1-1/2 CXSJ WD ADAPTER*

1-1/2 C X SJ WD ADAPTER*

1-1/2 X 1-1/4 CXSJ WD ADAPTER*

2 C X SJ WD ADAPTER*

1/2 CXM WP FLUSH VALVE ADAPTER*

3/4 CXM WP FLUSH VALVE ADAPTER*

 

Subject Copper Pipe Fittings – Bushings

3 X 1-1/2 FTGXC CD BUSHING*

5 X 4 FTGXC CP BUSHING*

6 X 2 FTGXC CP BUSHING*

6 X 3 FTGXC CP BUSHING*

6 X 4 FTGXC CP BUSHING*

6 X 5 FTGXC CP BUSHING*

1 X 1/2 FTGXFE CP FLUSH BUSHING*

1-1/4 X 1 FTGXFE CP FLUSH ADAPTER*

1 1/2 FTG X 1 FE C CP FLUSH BUSHING*

1-1/2X1-1/4 FTGXC WD BUSHING*

2 X 1-1/4 FTGXC WD BUSHING*

2 X 1-1/2 FTGXC WD BUSHING*

3 X 1-1/4 FTGXC WD BUSHING*

3 X 1-1/2 FTGXC WD BUSHING*

3 X 2 FTGXC WD BUSHING*

4 X 2 FTGXC WD BUSHING*

4 X 3 FTGXC WD BUSHING*

1-1/4 CXM WD TRAP BUSHING*

1-1/2 CXM WD TRAP BUSHING*

2 CXM WD TRAP BUSHING*

3/8 X 1/8 FTGXC WP BUSHING*

3/8 X 1/4 FTGXC WP BUSHING*

1/2 X 1/4 FTGXC WP BUSHING*

1/2 X 3/8 FTGXC WP BUSHING*

5/8 X 1/4 FTGXC WP BUSHING*

5/8 X 3/8 FTGXC WP BUSHING*

5/8 X 1/2 FTGXC WP BUSHING*

3/4 X 1/4 FTGXC WP BUSHING*

3/4 X 3/8 FTGXC WP BUSHING*

3/4 X 1/2 FTGXC WP BUSHING*

3/4 X 5/8 FTGXC WP BUSHING*

1 X 3/8 FTGXC WP BUSHING*

1 X 1/2 FTGXC WP BUSHING*

1 X 5/8 FTGXC WP BUSHING*

1 X 3/4 FTGXC WP BUSHING*

1-1/4 X 1/2 FTGXC WP BUSHING*

1-1/4 X 3/4 FTGXC WP BUSHING*

1-1/4 X 1 FTGXC WP BUSHING*

1-1/2 X 1/2 FTGXC WP BUSHING*

1-1/2 X 3/4 FTGXC WP BUSHING*

1-1/2 X 1 FTGXC WP BUSHING*

1-1/2 X1-1/4 FTGXC WP BUSHING*

2 X 1/2 FTGXC WP BUSHING*

2 X 3/4 FTGXC WP BUSHING*

2 X 1 FTGXC WP BUSHING*

2 X 1-1/4 FTGXC WP BUSHING*

2 X 1-1/2 FTGXC WP BUSHING*

2-1/2 X 1 FTGXC WP BUSHING*

2-1/2 X 1-1/4 FTGXC WP BUSHING*

2-1/2 X 1-1/2 FTGXC WP BUSHING*

2-1/2 X 2 FTGXC WP BUSHING*

3 X 1/2 FTGXC WP BUSHING*

3 X 3/4 FTGXC WP BUSHING*

3 X 1 FTGXC WP BUSHING*

3 X 1-1/4 FTGXC WP BUSHING*

3 X 1-1/2 FTGXC WP BUSHING*

3 X 2 FTGXC WP BUSHING*

3 X 2-1/2 FTGXC WP BUSHING*

3-1/2 X 2 FTGXC WP BUSHING*

3-1/2 X 2-1/2 FTGXC WP BUSHING*

3-1/2 X 3 FTGXC WP BUSHING*

4 X 1-1/4 FTGXC WP BUSHING*

4 X 1-1/2 FTGXC WP BUSHING*

4 X 2 FTGXC WP BUSHING*

4 X 2-1/2 FTGXC WP BUSHING*

4 X 3 FTGXC WP BUSHING*

4 X 3-1/2 FTGXC WP BUSHING*

1/2 X 1/4 FTGXC WP FLUSH BUSHING*

1/2 X 3/8 FTGXC WP FLUSH BUSHING*

5/8 X 3/8 FTGXC WP FLUSH BUSHING*

3/4 X 1/2 FTGXC WP FLUSH BUSHING*

1 X 1/2 FTGXC WP FLUSH BUSHING*

1 X 3/4 FTGXC WP FLUSH BUSHING*

1-1/4X3/4 FTGXC W FL BUSHING*

1-1/4 X 1 FTGXC WP FLUSH BUSHING*

1-1/2 X 1 FTGXC WP FLUSH BUSHING*

1-1/2 X 1-1/4 FTGXC WP FLUSH BUSHING*

2 X 1-1/2 FTGXC WP FLUSH BUSHING*

1 X 1/2 FE WP FLUSH BUSHING*

1-1/4 X 3/4 FE WP FLUSH BUSHING*

1-1/4 X 1 FTGXFE WP FLUSH BUSHING*

1-1/2 X 1 FTGXFE WP FLUSH BUSHING*

Subject Copper Pipe Fittings – Couplings

3/4 CXC CP COUPLING*

1-1/4 CXC CP COUPLING*

4 CXC CP COUPLING*

5 X 3 CXC CP COUPLING*

5 X 4 CXC CP COUPLING*

6 X 2 CXC CP COUPLING*

6 X 3 CXC CP COUPLING*

6 X 4 CXC CP COUPLING*

6 X 5 CXC CP COUPLING*

1/2 CXC CP JET DRAIN COUPLING

3/4 CXC CP JET DRAIN COUPLING

1 CXC CP JET DRAIN COUPLING

3/4 X 1/2 CXC CP ECCENTRIC COUPLING*

1 X 1/2 CP ECCENTRIC COUPLING*

1 X 3/4 CXC CP ECCENTRIC COUPLING*

1-1/4 X 1/2 CP ECCENTRIC COUPLING*

1-1/2 X 1 CXC CP ECCENTRIC COUPLING*

1-1/2 X 1-1/4 CXC CP ECCENTRIC COUPLING*

2 X 1-1/4 CXC CP ECCENTRIC COUPLING*

2 X 1-1/2 CXC CP ECCENTRIC COUPLING*

3 X 2 CXC CP ECCENTRIC COUPLING*

3/4 CXC CP CROSSOVER COUPLING*

1/2C X 1M X 1/2 FE CP BOILER COUPLING

1/2 X 1 X 1/2 CXMXFE CP BOILER COUPLING

1-1/4 CXC WD COUPLING*

1-1/2 CXC WD COUPLING*

1-1/2X 1-1/4 CXC WD COUPLING*

2 CXC WD COUPLING*

2 X 1-1/4 CXC WD COUPLING*

2 X 1-1/2 CXC WD COUPLING*

3 CXC WD COUPLING*

3 X 1-1/4 CXC WD COUPLING*

3 X 1-1/2 CXC WD COUPLING*

3 X 2 CXC WD COUPLING*

4 CXC WD COUPLING*

4 X 1-1/2 CXC WD COUPLING*

4 X 2 CXC WD COUPLING*

4 X 3 CXC WD COUPLING*

4 X 1-1/2 CXC CD COUPLING*

4 X 3 CXC CD COUPLING*

6 CXC WD COUPLING*

1-1/4 CXC WD COUPLING NO STOP*

1-1/2 CXC WD COUPLING NO STOP*

2 CXC WD COUPLING NO STOP*

3 CXC WD COUPLING NO STOP*

4 CXC WD COUPLING NO STOP*

1/8 CXC WP COUPLING*

1/4 CXC WP COUPLING*

1/4 X 1/8 CXC WP COUPLING*

3/8 CXC WP COUPLING*

3/8 X 1/4 CXC WP COUPLING*

1/2 CXC WP COUPLING*

1/2 X 1/8 CXC WP COUPLING*

1/2 X 1/4 CXC WP COUPLING*

1/2 X 3/8 CXC WP COUPLING*

5/8 CXC WP COUPLING*

5/8 X 1/4 CXC WP COUPLING*

5/8 X 3/8 CXC WP COUPLING*

5/8 X 1/2 CXC WP COUPLING*

3/4 CXC WP COUPLING*

3/4 X 1/4 CXC WP COUPLING*

3/4 X 3/8 CXC WP COUPLING*

3/4 X 1/2 CXC WP COUPLING*

3/4 X 5/8 CXC WP COUPLING*

1 CXC WP COUPLING*

1 X 3/8 CXC WP COUPLING*

1 X 1/2 CXC WP COUPLING*

1 X 5/8 CXC WP COUPLING*

1 X 3/4 CXC WP COUPLING*

1-1/4 CXC WP COUPLING*

1-1/4 X 1/2 CXC WP COUPLING*

1-1/4 X 3/4 CXC WP COUPLING*

1-1/4 X 1 CXC WP COUPLING*

1-1/2 CXC WP COUPLING*

1-1/2 X 1/2 CXC WP COUPLING*

1-1/2 X 3/4 CXC WP COUPLING*

1-1/2 X 1 CXC WP COUPLING*

1-1/2 X 1-1/4 CXC WP COUPLING*

2 CXC WP COUPLING*

2 X 1/2 CXC WP COUPLING*

2 X 3/4 CXC WP COUPLING*

2 X 1 CXC WP COUPLING*

2 X 1-1/4 CXC WP COUPLING*

2 X 1-1/2 CXC WP COUPLING*

2-1/2 CXC WP COUPLING*

2-1/2 X 3/4 CXC WP COUPLING*

2-1/2 X 1 CXC WP COUPLING*

2-1/2 X 1-1/4 CXC WP COUPLING*

2-1/2 X 1-1/2 CXC WP COUPLING*

2-1/2 X 2 CXC WP COUPLING*

3 CXC WP COUPLING*

3 X 3/4 CXC WP COUPLING*

3 X 1 CXC WP COUPLING*

3 X 1-1/4 CXC WP COUPLING*

3 X 1-1/2 CXC WP COUPLING*

3 X 2 CXC WP COUPLING*

3 X 2-1/2 CXC WP COUPLING*

3-1/2 CXC WP COUPLING*

3-1/2 X 3 CXC WP COUPLING*

4 CXC WP COUPLING*

4 X 1-1/2 CXC WP COUPLING*

4 X 2 CXC WP COUPLING*

4 X 2-1/2 CXC WP COUPLING*

4 X 3 CXC WP COUPLING*

4 X 3-1/2 CXC WP COUPLING*

5 CXC WP COUPLING*

6 CXC WP COUPLING*

6 X 2-1/2 WP COUPLINGS*

1-1/4 X 3/4 CXC WP ECCENTRIC COUPLING*

1-1/4 X 1 CXC WP ECCENTRIC COUPLING*

1/8 CXC WP COUPLING NO STOP*

1/4 CXC WP COUPLING NO STOP*

3/8 CXC WP COUPLING NO STOP*

1/2 CXC WP COUPLING NO STOP*

5/8 CXC WP COUPLING NO STOP*

3/4 CXC WP COUPLING NO STOP*

1 CXC WP COUPLING NO STOP*

1-1/4 CXC WP COUPLING NO STOP*

1-1/2 CXC WP COUPLING NO STOP*

2 CXC WP COUPLING NO STOP*

2-1/2 CXC WP COUPLING NO STOP*

3 CXC WP COUPLING NO STOP*

4 CXC WP COUPLING NO STOP*

5 CXC WP COUPLING NO STOP*

6 CXC WP COUPLING NO STOP*

1/2 X 3 CXC WP REPAIR COUPLING

1/2 X 6 C X C WP REPAIR COUPLING

3/4 X 3 C X C WP REPAIR COUPLING

1/8 CXC WP RING COUPLING*

1/4 CXC WP RING COUPLING*

3/8 CXC WP RING COUPLING*

1/2 CXC WP RING COUPLING*

5/8 CXC WP RING COUPLING*

3/4 CXC WP RING COUPLING*

1 CXC WP RING COUPLING*

1-1/4 CXC WP RING COUPLING*

1-1/2 CXC WP RING COUPLING*

2 CXC WP RING COUPLING*

2-1/2 CXC WP RING COUPLING*

3 CXC WP RING COUPLING*

4 CXC WP RING COUPLING*

1/2 X 3-1/4 FTGXC WP SLIDE COUPLING

3/4 X 5 FTGXC WP SLIDE COUPLING

1/2 CXC WP CROSSOVER COUPLING*

3/4 CXC WP CROSSOVER COUPLING*

 

Subject Copper Pipe Fittings – Elbows

1-1/4 CXC 11-1/4 CD ELBOW*

1-1/2 CXC 11-1/4 CD ELBOW*

2 CXC 11-1/4 CD ELBOW*

3 CXC 11-1/4 CD ELBOW*

4 C X C 11-1/4 CD ELBOW*

1-1/4 CXC 22-1/2 CD ELBOW*

1-1/2 CXC 22-1/2 CD ELBOW*

2 CXC 22-1/2 CD ELBOW*

3 CXC 22-1/2 CD ELBOW*

4 CXC 22-1/2 CD ELBOW*

3 FTGXC 45 CD ELBOW*

4 FTGXC 45 CD ELBOW*

2 CXM CD 45 ELBOW*

1-1/4 CXC 45 CD ELBOW*

1-1/2 CXC 45 CD ELBOW*

2 CXC 45 CD ELBOW*

3 CXC 45 CD ELBOW*

4 CXC 45 CD ELBOW*

1-1/4 CXC 60 CD ELBOW*

1-1/2 CXC 60 CD ELBOW*

2 CXC 60 CD ELBOW*

3 CXC 60 CD ELBOW*

4 CXC 60 CD ELBOW*

1-1/4 CXC CD 90 ELBOW*

1-1/4 FTGXC CD 90 ELBOW*

1-1/2 FTGXC CD 90 ELBOW*

2 FTGXC CD 90 ELBOW*

1-1/2 CXC CD 90 ELBOW*

1-1/2 X 1-1/4 CXC CD 90 ELBOW*

3 CD FTGXC 90 ELBOW*

4 FTGXC CD 90 ELBOW*

2 CXC CD 90 ELBOW*

2X 1-1/4 CXC CD 90 ELBOW*

2 X 1-1/2 CXC CD 90 ELBOW*

1-1/2 CXFE CD 90 ELBOW*

2 CXFE CD 90 ELBOW*

1-1/2 CXM CD 90 ELBOW

2 CXM CD 90 ELBOW

3 CXC CD 90 ELBOW

4 CXC CD 90 ELBOW

1-1/2 CXSJ CD 90 ELBOW

1/2 X 1 CXC CP CLOSE RETURN BEND

3/4 1-3/8 CXC CP CLOSE RETURN BEND

1 X 1-3/4 CXC CP CLOSE RETURN BEND

1/2 C X M CP 45 ELBOW

3/4 C X M CP 45 ELBOW

1-1/4 C X M CP 45 ELBOW

4 CXC CP 45 ELBOW

6 CXC CP 45 ELBOW

1/2 C X C CP 90 ELBOW

1-1/4 CXC CP 90 ELBOW

1-1/4 X 1/2 CXC CP 90 ELBOW

1-1/4 X 3/4 CP 90 ELBOW

1-1/4 X 1 CP 90 ELBOW

1-1/2 X 1/2 CP 90 ELBOW

1-1/2 X 3/4 CXC CP 90 ELBOW

1-1/2 X 1 CXC CP 90 ELBOW

1/4 C X FE CP 90 ELBOW

1/2 CXFE CP 90 ELBOW

1/2 X 3/8 CXFE CP 90 ELBOW

1/2 X 3/4 CXFE CP 90 ELBOW

1/2 X 1 CXFE CP 90 ELBOW

3/4 CXFE CP 90 ELBOW

3/4 X 1/2 CXFE CP 90 ELBOW

3/4 X 1 CXFE CP 90 ELBOW

1 CXFE CP 90 ELBOW

1 X 1/2 C X FE CP 90 ELBOW

1 X 3/4 CXFE CP 90 ELBOW

1-1/4 CXFE CP 90 ELBOW

1-1/4 X 1/2 CXFE CP 90 ELBOW

1-1/4 X 3/4 CXFE CP 90 ELBOW

1-1/4 X 1 CXFE CP 90 ELBOW

2 X 3/4 CXC CP 90 ELBOW

2 X 1 CXC CP 90 ELBOW

2 X 1-1/4 CXC CP 90 ELBOW

1-1/2 CXFE CP 90 ELBOW

1-1/2 X 1 C X FE CP 90 ELBOW

2 CXFE CP 90 ELBOW

3 C X FE CP 90 ELBOW

1/2 CXFE CP 90 DROP EAR ELBOW

1/2C X 3/8FE CP 90 DROP EAR ELBOW

1/2 X 3/4 CXFE CP 90 DROP EAR ELBOW

3/4 CXFE CP 90 DROP EAR ELBOW

3/4C X 1/2FE CP 90 DROP EAR ELBOW

1 CXFE CP 90 DROP EAR ELBOW

1/2 CXFE CP DROP EAR IMPORT 90 ELBOW

1/2 CXFE CP HIGH EAR 90 ELBOW

3/4 CXFE CP HIGH EAR 90 ELBOW

1/2 CXFE CP FLANGE SINK 90 ELBOW

1/2 CXM CP 90 ELBOW

1/2 X 3/8 CXM CP 90 ELBOW

1/2 X 3/4 CXM CP 90 ELBOW

3/4 CXM CP 90 ELBOW

3/4 X 1/2 CXM CP 90 ELBOW

3/4 C X 1 M CP 90 ELBOW

1 CXM CP 90 ELBOW

1 X 3/4 CXM CP 90 ELBOW

1-1/4 CXM CP P 90 ELBOW

1-1/4 X 1 CXM CP 90 ELBOW

1-1/2 CXM CP 90 ELBOW

2 CXM CP 90 ELBOW

1/2 CXC CP DROP EAR 90 ELBOW

3/4 CXC CP 90 DROP EAR ELBOW

1 CXC CP 90 DROP EAR ELBOW

1/2 CXC CP HIGH EAR 90 ELBOW

3/4 CXC CP HIGH EAR 90 ELBOW

6 CXC CP 90 ELBOW

1/2C X 1/8FE X 1/2C CP BASE TEE*

1/2C X 1/8FE X 3/4C CP BASE TEE*

3/4C X 1/8FE X 3/4C CP BASE TEE*

1C X 1/8FE X 1 C CP BASE TEE*

1-1/4C X 1/8FEX1-1/4C CP BASE TEE*

3/4FE X 1/8FE X 3/4C CP BASE TEE

1-1/4 CXFTG WD 45 ELBOW*

1-1/2 FTGXC WD 45 ELBOW*

2 FTGXC WD 45 ELBOW*

3 C X FTG WD 45 ELBOW*

1-1/4 CXC WD 45 ELBOW*

1-1/2 CXC WD 45 ELBOW*

2 CXC WD 45 ELBOW*

3 CXC WD 45 ELBOW*

1-1/4 CXC WD 90 ELBOW*

1-1/4 FTGXC WD 90 ELBOW*

1-1/2 FTGXC WD 90 ELBOW*

2 FTGXC WD 90 ELBOW*

1-1/2 CXC WD 90 ELBOW*

2 CXC WD 90 ELBOW*

3 CXC WD 90 ELBOW*

1-1/2 CXC WD 90 LT ELBOW*

2 CXC WD 90 LT ELBOW*

1/4 CXC WP 45 ELBOW*

3/8 CXC WP 45 ELBOW*

1/2 CXC WP 45 ELBOW*

5/8 CXC WP 45 ELBOW*

3/4 CXC WP 45 ELBOW*

1 CXC WP 45 ELBOW*

1-1/4 CXC WP 45 ELBOW*

1/4 FTG X C WP 45 ELBOW*

3/8 FTGXC WP 45 ELBOW*

1/2 FTGXC WP 45 ELBOW*

5/8 FTGXC WP 45 ELBOW*

3/4 FTGXC WP 45 ELBOW*

1 FTGXC WP 45 ELBOW*

1-1/4 FTGXC WP 45 ELBOW*

1-1/2 FTGXC WP 45 ELBOW*

2 FTGXC WP 45 ELBOW*

1-1/2 CXC WP 45 ELBOW*

2-1/2 FTGXC WP 45 ELBOW*

2 CXC WP 45 ELBOW*

2-1/2 CXC WP 45 ELBOW*

3 CXC WP 45 ELBOW*

4 CXC WP 45 ELBOW*

1/4 CXC WP 90 ELBOW*

3/8 CXC WP 90 ELBOW*

1/2 CXC WP 90 ELBOW*

5/8 CXC WP 90 ELBOW*

3/4 CXC WP 90 ELBOW*

3/4 X 1/2 CXC WP 90 ELBOW*

1 CXC WP 90 ELBOW*

1 X 1/2 CXC WP 90 ELBOW*

1 X 3/4 CXC WP 90 ELBOW*

1-1/4 CXC WP 90 ELBOW*

1-1/4 X 1 CXC WP 90 ELBOW*

1/4 FTGXC WP 90 ELBOW*

3/8 FTGXC WP 90 ELBOW*

1/2 FTGXC WP 90 ELBOW*

5/8 FTGXC WP 90 ELBOW*

3/4 FTGXC WP 90 ELBOW*

1 FTGXC WP 90 ELBOW*

1-1/4 FTGXC WP 90 ELBOW*

1/2 FTGXFTG WP 90 ELBOW*

3/4 FTG X FTG WP 90 ELBOW*

1-1/2 FTGXC WP 90 ELBOW*

2 FTGXC WP 90 ELBOW*

1-1/2 CXC WP 90 ELBOW*

2-1/2 FTGXC WP 90 ELBOW*

1-1/2CX 1-1/4C WP 90 ELBOW*

2 CXC WP 90 ELBOW*

2-1/2 CXC WP 90 ELBOW*

3 CXC WP 90 ELBOW*

4 CXC WP 90 ELBOW*

1/2 CXC WP 90 VENT ELBOW*

3/4 CXC WP 90 VENT ELBOW*

1 CXC WP 90 VENT ELBOW*

1/4 CXC LT WP 90 ELBOW

3/8 CXC LT WP 90 ELBOW

1/2 CXC LT WP 90 ELBOW

5/8 CXC LT WP 90 ELBOW

3/4 CXC LT WP 90 ELBOW

1 CXC LT WP 90 ELBOW

1-1/4 CXC LT WP 90 ELBOW

1/4 CXFTG LT WP 90 ELBOW

3/8 C X FTG LT WP 90 ELBOW

1/2 C X FTG LT WP 90 ELBOW

5/8 CXFTG LT WP 90 ELBOW

3/4 CXFTG LT WP 90 ELBOW

1 CXFTG LT WP 90 ELBOW

1-1/4 CXFTG LT WP 90 ELBOW

1-1/2 CXFTG LT WP 90 ELBOW

2 CXFTG LT WP 90 ELBOW

1-1/2 CXC LT WP 90 ELBOW

2 CXC LT WP 90 ELBOW

Subject Copper Pipe Fittings – Flanges

3 X 4 CXC CD CLOSET FLANGE*

8 COMPANION CP FLANGE 150# SILVER BRAZED

4 CD CAULKING FLOOR FLANGE*

4 X 4 CXC CD CLOSET FLANGE*

3 X 4 FITTING CD CLOSET FLANGE

3 X 4 CD ECCENTRIC CLOSET FLANGE*

3 X 4 CD M J CLOSET FLANGE*

3/4 CP COMPANION FLANGE - 125#

1/2 CP COMPANION FLANGE - 125#

1-1/4 CP COMPANION FLANGE - 125#

1 CP COMPANION FLANGE - 125#

2 CP COMPANION FLANGE - 125#

1-1/2 CP COMPANION FLANGE - 125#

3 CP COMPANION FLANGE - 125#

2-1/2 CP COMPANION FLANGE - 125#

4 CP COMPANION FLANGE - 125#

3-1/2 CP COMPANION FLANGE #125

6 CP COMPANION FLANGE - 125#

5 CP COMPANION FLANGE - 125#

1/2 CP COMPANION FLANGE - 150#

8 CP COMPANION FLANGE - 125#

1 CP COMPANION FLANGE - 150#

3/4 CP COMPANION FLANGE - 150#

1-1/2 CP COMPANION FLANGE - 150#

1-1/4 CP COMPANION FLANGE - 150#

2-1/2 CP COMPANION FLANGE - 150#

2 CP COMPANION FLANGE - 150#

3-1/2 CP COMPANION FLANGE - 150#

3 CP COMPANION FLANGE - 150#

5 CP COMPANION FLANGE - 150#

4 X 9 CP COMPANION FLANGE - 150#

8 CP COMPANION FLANGE - 150#

6 CP COMPANION FLANGE -150#

1 X 5 CP COMPANION FLANGE - 300#

1/2 CP COMPANION FLANGE - 300#

1-1/2 X 6-1/2 CP COMPANION FLANGE-300#

1-1/4 CP COMPANION FLANGE - 300#

2-1/2 CP COMPANION FLANGE - 300#

2 CP COMPANION FLANGE - 300#

4 CP COMPANION FLANGE - 300#

3 X 8-1/4 CP COMPANION FLANGE - 300#

2 X 6 CP BLIND COMPANION FLANGE

1-1/2 CP BLIND COMPANION FLANGE

13-1/2 X 8 CP BLIND COMPANION FLANGE

3 X 7-1/2 CP BLIND COMPANION FLANGE

3 COMPANION CP FLANGE 150# SILVER BRAZED

8 COMPANION CP FLANGE 125# SILVER BRAZED

 

Subject Copper Pipe Fittings – Pressure Tees

1/2 CXCXC CP DROP EAR TEE

1/2 CXCXFE CP TEE

1/2 X 1/2 X 1/4 CXCXFE CP TEE

1/2C X 1/2C X 3/8FE CP TEE

1/2 X 1/2 X 3/4 CXCXFE CP TEE

3/4 CXCXFE CP TEE

3/4C X 1/2C X 1/2FE CP TEE

3/4 X 1/2 X 3/4 CXCXFE CP TEE

3/4 X 3/4 X 3/8 CCFE CP TEE

3/4C X 3/4C X 1/2FE CP TEE

3/4 X 3/4 X 1 CXCXFE CP TEE

1 CXCXFE CP CP TEE

1 X 1 X 1/2 CXCXFE CP TEE

1 X 1 X 3/4 CXCXFE CP TEE

1-1/4 CXCXFE CP TEE

1-1/4 X 1-1/4 X 1/2 CCFE CP TEE

1-1/4 X 1-1/4 X 3/4 CCFE CP TEE

1-1/4X1-1/4X1 CCFE CP TEE

1-1/2 CXCXFE CP TEE

1-1/2X1-1/2X1/2 CCFE CP TEE

1-1/2 X 1-1/2 X 3/4 CCFE CP TEE

1-1/2 X 1-1/2 X 1 CCFE CP TEE

1/2 CXFEXFE CP TEE

1/2C X 3/4FE X 1/2FE CP TEE

3/4 C X FE X FE CP TEE

3/4 C X 3/4 FE X 1/2 FE CP TEE

2 CXCXFE CP TEE

2 X 2 X 1/2 CXCXFE CP TEE

2 X 2 X 3/4 CXCXFE CP TEE

2 X 2 X 1 CXCXFE CP TEE

1/2 CXCXFE CP DROP EAR TEE

3/4 CXCXFE CP DROP EAR TEE

3/4C X 3/4C X 1/2FE CP DROP EAR TEE

3/8 C X FE X C CP TEE

1/2 CXFEXC CP TEE

1/2C X 1/2FE X 3/4C CP TEE

1/2C X 3/4FE X 1/2C CP TEE

3/4 CXFEXC CP TEE

3/4 X 1/2 X 1/2 CXFEXC CP TEE

3/4C X 1/2FE X 3/4C CP TEE

3/4C X 3/4FE X 1/2C CP TEE

1 CXFEXC CP TEE

1C X 1/2FE X 1C CP TEE

1 X 3/4 X 1 CXFEXC CP TEE

1-1/4 CXFEXC CP TEE

1-1/4 X 1/2 X 1-1/4 CXFEXC CP TEE

1-1/4 X 3/4 X 1-1/4 CXFEXC CP TEE

1-1/2 C X FE X C CP TEE

1-1/2X1/2X1-1/2 CXFEXC CP TEE

1-1/2X3/4X1-1/2 CXFEXC CP TEE

1/2 FEXFEXC CP TEE

3/4 FEXFEXC CP TEE

3/4FE X 1/2FE X 1/2C CP TEE

3/4FE X 1/2FE X 3/4C CP TEE

3/4FE X 3/4FE X 1/2C CP TEE

2 C X FE X C CP TEE

2 X 1/2 X 2 CXFEXC CP TEE

2 X 3/4 X 2 CXFEXC CP TEE

1/2FE X 3/4M X 1/2C CP TEE

1/2 CXCXCXC CP CROSS*

3/4 CXCXCXC CP CROSS*

1 CXCXCXC CP CROSS*

1-1/2 CXCXCXC CP CROSSES*

2 CXCXCXC CP CROSS*

3/4 CXFTGXC CP TEE*

2 X 2 X 3 CXCXC CP TEE*

2-1/2 X 1/2 X 2-1/2 CP TEE*

2-1/2 X 1-1/2 X 1-1/2 CP TEE*

5 CXCXC CP TEE*

5 X 5 X 3 CXCXC CP TEE*

6 CXCXC CP TEE*

3/4FE X 1/8 FE X 3/4C WP BASEBOARD TEE*

1/8 CXCXC WP TEE*

1/4 CXCXC WP TEE*

3/8 CXCXC WP TEE*

1/2 CXCXC WP TEE*

1/2 X 1/2 X 3/4 CXCXC WP TEE*

3/4 CXCXC WP TEE*

3/4 X 1/2 X 1/2 CXCXC WP TEE*

3/4 X 1/2 X 3/4 CXCXC WP TEE*

3/4 X 3/4 X 1/4 CXCXC WP TEE*

3/4C X 3/4C X 3/8C CXCXC WP TEE*

3/4 X 3/4 X 1/2 CXCXC WP TEE*

1 CXCXC WP TEE*

1 X 1/2 X 1/2 CXCXC WP TEE*

1 X 1/2 X 3/4 CXCXC WP TEE*

1 X 1/2 X 1 CXCXC WP TEE*

1 X 3/4 X 1/2 CXCXC WP TEE*

1 X 3/4 X 3/4 CXCXC WP TEE*

1 X 3/4 X 1 CXCXC WP TEE*

1 X 1 X 3/8 CXCXC WP TEE*

1 X 1 X 1/2 CXCXC WP TEE*

1 X 1 X 3/4 CXCXC WP TEE*

1-1/4 CXCXC WP TEE*

1-1/4 X 1/2 X 1/2 CXCXC WP TEE*

1-1/4 X 1/2 X 3/4 CXCXC WP TEE*

1-1/4 X 1/2 X 1 CXCXC WP TEE*

1-1/4 X 1/2 X 1-1/4 CXCXC WP TEE*

1-1/4 X 3/4 X 1/2 CXCXC WP TEE*

1-1/4 X 3/4 X 3/4 CXCXC WP TEE*

1-1/4 X 3/4 X 1 CXCXC WP TEE*

1-1/4 X 3/4 X 1-1/4 CXCXC WP TEE*

1-1/4 X 1 X 1/2 CXCXC WP TEE*

1-1/4 X 1 X 3/4 CXCXC WP TEE*

1-1/4 X 1 X 1 CXCXC WP TEE*

1-1/4 X 1 X 1-1/4 CXCXC WP TEE*

1-1/4 X 1-1/4 X 1/2 CXCXC WP TEE*

1-1/4 X 1-1/4 X 3/4 CXCXC WP TEE*

1-1/4C X 1-1/4C X 1C CXCXC WP TEE*

1-1/2 CXCXC CXCXC WP TEE*

1-1/2 X 1/2 X 1/2 CXCXC WP TEE*

1-1/2 X 1/2 X 3/4 CXCXC WP TEE*

1-1/2 X 1/2 X 1 CXCXC WP TEE*

1-1/2 X 1/2 X 1-1/4 CXCXC WP TEE*

1-1/2 X 1/2 X 1-1/2 CXCXC WP TEE*

1-1/2 X 3/4 X 1/2 CXCXC WP TEE*

1-1/2 X 3/4 X 3/4 CXCXC WP TEE*

1-1/2 X 3/4 X 1 CXCXC WP TEE*

1-1/2 X 3/4 X 1-1/4 CXCXC WP TEE*

1-1/2 X 3/4 X 1-1/2 CXCXC WP TEE*

1-1/2 X 1 X 1/2 CXCXC WP TEE*

1-1/2 X 1 X 3/4 CXCXC WP TEE*

1-1/2 X 1 X 1 CXCXC WP TEE*

1-1/2 X 1 X 1-1/4 CXCXC WP TEE*

1-1/2 X 1 X 1-1/2 CXCXC WP TEE*

1-1/2 X 1-1/4 X 1/2 CXCXC WP TEE*

1-1/2 X 1-1/4 X 3/4 CXCXC WP TEE*

1-1/2 X 1-1/4 X 1 CXCXC WP TEE*

1-1/2 X 1-1/4 X 1-1/4 CXCXC WP TEE*

1-1/2 X 1-1/4 X 1-1/2 CXCXC WP TEE*

1-1/2 X 1-1/2 X 1/2 CXCXC WP TEE*

1-1/2 X 1-1/2 X 3/4 CXCXC WP TEE*

1-1/2 X 1-1/2 X 1 CXCXC WP TEE*

1-1/2 X 1-1/2 X 1-1/4 CXCXC WP TEE*

2 CXCXC CXCXC WP TEE*

2 X 1/2 X 2 CXCXC WP TEE*

2 X 3/4 X 2 CXCXC WP TEE*

2 X 1 X 3/4 CXCXC WP TEE*

2 X 1 X 1 CXCXC WP TEE*

2C X 1C X 1-1/4C CXCXC WP TEE*

2 X 1 X 1-1/2 CXCXC WP TEE*

2 X 1 X 2 CXCXC WP TEE*

2 X 1-1/4 X 1/2 CXCXC WP TEE*

2 X 1-1/4 X 3/4 CXCXC WP TEE*

2 X 1-1/4 X 1 CXCXC WP TEE*

2 X 1-1/4 X 1-1/4 CXCXC WP TEE*

2 X 1-1/4 X 1-1/2 CXCXC WP TEE*

2 X 1-1/4 X 2 CXCXC WP TEE*

2 X 1-1/2 X 1/2 CXCXC WP TEE*

2 X 1-1/2 X 3/4 CXCXC WP TEE*

2 X 1-1/2 X 1 CXCXC WP TEE*

2 X 1-1/2 X 1-1/4 CXCXC WP TEE*

2 X 1-1/2 X 1-1/2 CXCXC WP TEE*

2 X 1-1/2 X 2 CXCXC WP TEE*

2 X 2 X 1/2 CXCXC WP TEE*

2 X 2 X 3/4 CXCXC WP TEE*

2 X 2 X 1 CXCXC WP TEE*

2 X 2 X 1-1/4 CXCXC WP TEE*

2 X 2 X 1-1/2 CXCXC WP TEE*

2-1/2 CXCXC WP TEE*

2-1/2 X 1/2 X 2-1/2 CXCXC WP TEE*

2-1/2 X 3/4 X 1-1/2 CXCXC WP TEE*

2-1/2 X 3/4 X 2-1/2 CXCXC WP TEE*

2-1/2 X 1 X 1-1/4 CXCXC WP TEE*

2-1/2 X 1 X 1-1/2 CXCXC WP TEE*

2-1/2 X 1 X 2 CXCXC WP TEE*

2-1/2 X 1 X 2-1/2 CXCXC WP TEE*

2-1/2 X 1-1/4 X 1-1/4CXCXC WP TEE*

2-1/2 X 1-1/4 X 1-1/2 CXCXC WP TEE*

2-1/2 X 1-1/4 X 2 CXCXC WP TEE*

2-1/2 X 1-1/4 X 2-1/2 CXCXC WP TEE*

2-1/2 X 1-1/2 X 1 CXCXC WP TEE*

2-1/2 X 1-1/2 X 1-1/4 CXCXC WP TEE*

2-1/2 X 1-1/2 X 1-1/2 CXCXC WP TEE*

2-1/2 X 1-1/2 X 2 CXCXC WP TEE*

2-1/2 X 1-1/2 X 2-1/2 CXCXC WP TEE*

2-1/2 X 2 X 1/2 CXCXC WP TEE*

2-1/2 X 2 X 3/4 CXCXC WP TEE*

2-1/2 X 2 X 1 CXCXC WP TEE*

2-1/2 X 2 X 1-1/4 CXCXC WP TEE*

2-1/2 X 2 X 1-1/2 CXCXC WP TEE*

2-1/2 X 2 X 2 CXCXC WP TEE*

2-1/2 X 2 X 2-1/2 CXCXC WP TEE*

2-1/2 X 2-1/2 X 1/2 CXCXC WP TEE*

2-1/2 X 2-1/2 X 3/4 CXCXC WP TEE*

2-1/2 X 2-1/2 X 1 CXCXC WP TEE*

2-1/2 X 2-1/2 X 1-1/4 CXCXC WP TEE*

2-1/2 X 2-1/2 X 1-1/2 CXCXC WP TEE*

2-1/2 X 2-1/2 X 2 CXCXC WP TEE*

3 CXCXC WP TEE*

3 X 3/4 X 3 CXCXC WP TEE*

3 X 1 X 3 CXCXC WP TEE*

3 X 1-1/4 X 3 CXCXC WP TEE*

3 X 1-1/2 X 1-1/4 CXCXC WP TEE*

3 X 1-1/2 X 1-1/2 CXCXC WP TEE*

3 X 1-1/2 X 2-1/2 CXCXC WP TEE*

3 X 1-1/2 X 3 CXCXC WP TEE*

3 X 2 X 1/2 CXCXC WP TEE*

3 X 2 X 1 CXCXC WP TEE*

3 X 2 X 1-1/4 CXCXC WP TEE*

3 X 2 X 1-1/2 CXCXC WP TEE*

3 X 2 X 2 CXCXC WP TEE*

3 X 2 X 2-1/2 CXCXC WP TEE*

3 X 2 X 3 CXCXC WP TEE*

3 X 2-1/2 X 3/4 CXCXC WP TEE*

3 X 2-1/2 X 1 CXCXC WP TEE*

3 X 2-1/2 X 1-1/4 CXCXC WP TEE*

3 X 2-1/2 X 1-1/2 CXCXC WP TEE*

3 X 2-1/2 X 2 CXCXC WP TEE*

3 X 2-1/2 X 2-1/2 CXCXC WP TEE*

3 X 2-1/2 X 3 CXCXC WP TEE*

3 X 3 X 1/2 CXCXC WP TEE*

3 X 3 X 3/4 CXCXC WP TEE*

3 X 3 X 1 CXCXC WP TEE*

3 X 3 X 1-1/4 CXCXC WP TEE*

3 X 3 X 1-1/2 CXCXC WP TEE*

3 X 3 X 2 CXCXC WP TEE*

3 X 3 X 2-1/2 CXCXC WP TEE*

4 CXCXC WP TEE*

4 X 1-1/2 X 3 CXCXC WP TEE*

4 X 2 X 2 CXCXC WP TEE*

4 X 2 X 3 CXCXC WP TEE*

4 X 2-1/2 X 2-1/2 CXCXC WP TEE*

4 X 2-1/2 X 3 CXCXC WP TEE*

4 X 3 X 2 CXCXC WP TEE*

4 X 3 X 2-1/2 CXCXC WP TEE*

4 X 3 X 3 CXCXC WP TEE*

4 X 4 X 1/2 CXCXC WP TEE*

4 X 4 X 3/4 CXCXC WP TEE*

4 X 4 X 1 CXCXC WP TEE*

4 X 4 X 1-1/4 CXCXC WP TEE*

4 X 4 X 1-1/2 CXCXC WP TEE*

4 X 4 X 2 CXCXC WP TEE*

4 X 4 X 2-1/2 CXCXC WP TEE*

4 X 4 X 3 CXCXC WP TEE*

5 X 5 X 2 CXCXC WP TEE*

Subject Copper Pipe Fittings – Unions

2-1/2 CXFE CP UNION*

2-1/2 CXC CP UNION*

2 CXM CP UNION*

2-1/2 C X M CP UNION*

3 CXC CP UNION*

3/4 CXM CP UNION ELBOW

3/4 CXC WP UNION*

1 CXC WP UNION*

1-1/4 CXC WP UNION*

1-1/2 C X C WP UNION*

1/2 C X FE WP UNION*

3/4 C X FE WP UNION*

1 C X FE WP UNION*

2 CXC WP UNION*

1-1/4 C X FE WP UNION*

1-1/2 C X FE WP UNION*

2 C X FE WP UNION*

1/2 C X M WP UNION*

3/4 C X M WP UNION*

1 C X M WP UNION*

1-1/4 C X M WP UNION*

1-1/2 C X M WP UNION*

2 C X M WP UNION*

 

Subject Copper Pipe Fittings – P-Traps

1-1/4 CXC CD P-TRAP BODY N/CO

1-1/2 C X C CD P-TRAP BODY N/CO

2 C X C CD P-TRAP BODY N/CO

3 C X C CD P-TRAP BODY N/CO

1-1/4 CD P TRAP - N/CO

1-1/4 CD P TRAP-N/CO- ELBOW

1-1/2 P TRAP - N/CO-

1-1/2 CD P TRAP-N/CO-ELBOW

2 CD P TRAP - N/CO

2 CD P TRAP-N/CO-ELBOW

3 CD P TRAP - N/CO

3 CD P TRAPS-N/CO-ELBOW

1 1/4 CD S TRAP N/CO

1 1/2 CD S TRAP N/CO

1-1/4 CD S TRAP - W/CO

1-1/2 CD S TRAP - W/CO

2 CD S TRAP W/CO

1-1/2 C X C CD P-TRAP BODY - W/CO

2 C X C CD P-TRAP BODY - W/CO

1-1/4 CD P TRAP - W/CO

1-1/4 CD P TRAP-W/CO-ELBOW

1-1/2 CD P TRAP W/CO

1-1/2 CD P TRAP-W/CO-ELBOW

2 CD P TRAP - W/CO

2 CD P TRAP-W/CO-ELBOW

3 CD P TRAP - W/CO

3 CD P TRAP-W/CO-ELBOW

3 X 6 X 1-1/2 X 1-1/2 CD DRUM TRAP

1-1/2 CD P TRAP L/CO GROUND SWIVEL

1-1/2 CD P TRAP W/CO GROUND SWIVEL

Subject Copper Pipe Fittings – DWV TY’s

1-1/4 CXCXCXC CD DOUBLE WASTE FTG

1-1/2 CXCXCXC CD DOUBLE WASTE FTG

1-1/2 1-1/4 1-1/4 1-1/4 CXCXCXC CD DOUBLE WASTE FTG

1-1/2 1-1/4 1-1/2 1-1/2 CXCXCXC CD DOUBLE WASTE FTG

1-1/2 1-1/2 1-1/4 1-1/4 CXCXCXC CD DOUBLE WASTE FTG

2 1-1/2-1-1/4-1-1/4 CXCXCXC CD DOUBLE WASTE FTG

2 1-1/2 1-1/2 1-1/2 CXCXCXC CD DOUBLE WASTE FTG

1-1/4 CXCXC CD TY*

1-1/2 CXCXC CD TY*

1-1/2 X 1-1/4 X 1-1/4 CXCXC CD TY*

1-1/2 X 1-1/4 X 1-1/2 CXCXC CD TY*

1-1/2 X 1-1/2 X 1-1/4 CXCXC CD TY*

3 FTG X C X C CD TY*

3 X 3 X 1-1/4 FTGXCXC CD TY*

3 X 3 X 1-1/2 FTGXCXC CD TY*

3 X 3 X 2 FTGXCXC CD TY*

2 CXCXC CD TY*

2 X 1-1/4 X 1-1/4 CXCXC CD TY*

2 X 1-1/4 X 1-1/2 CXCXC CD TY*

2 X 1-1/4 X 2 CXCXC CD TY*

2 X 1-1/2 X 1-1/4 CXCXC CD TY*

2 X 1-1/2 X 1-1/2 CXCXC CD TY*

2 X 1-1/2 X 2 CXCXC CD TY*

2 X 2 X 1-1/4 CXCXC CD TY*

2 X 2 X 1-1/2 CXCXC CD TY*

1-1/2 CXCXFE CD TY*

2 CXCXFE CD TY

2 X 1-1/2 X 1-1/2 CXCXF CD TY

3 CXCXC CD TY*

3 X 1-1/2 X 1-1/4 CXCXC CD TY*

3 X 2 X 1-1/2 CXCXC CD TY*

3 X 3 X 1-1/4 CXCXC CD TY*

3 X 3 X 1-1/2 CXCXC CD TY*

3 X 3 X 2 CXCXC CD TY*

4 CXCXC CD TY*

4 X 4 X 1-1/2 CXCXC CD TY*

4 X 4 X 2 CXCXC CD TY*

4 X 4 X 3 CXCXC CD TY*

1-1/4 CXCXCXC CD DOUBLE TY

1-1/2 CXCXCXC CD DOUBLE TY

1-1/2 1-1/2 1-1/4 1-1/4 CXCXCXC CD DOUBLE TY

1-1/2 1-1/4 1-1/4 1-1/4 CXCXCXC CD DOUBLE TY

2 CXCXCXC CD DOUBLE TY

2 X 2 X 1-1/4 X 1-1/4 CXCXCXC CD DOUBLE TY

2 X 2 X 1-1/2 X 1-1/2 CXCXCXC CD DOUBLE TY

3 CXCXCXC CD DOUBLE TY

3 X 3 X 1-1/4 X 1-1/4 CXCXCXC CD DOUBLE TY

3 X 3 X 1-1/2 X 1-1/2 CXCXCXC CD DOUBLE TY

3 X 3 X 2 X 2 CXCXCXC CD DOUBLE TY

4 CXCXCXC CD DOUBLE TY

4 X 4 X 2 X 2 CXCXCXC CD DOUBLE TY

4 X 4X 3 X 3 CXCXCXC CD DOUBLE TY

1-1/4 CXCXCXC CD DOUBLE LONG TURN TY

1-1/2 CXCXCXC CD DOUBLE LONG TURN TY

1-1/2 1-1/2 1-1/4 1-1/4 CXCXCXC CD DLT TY

2 CXCXCXC CD DOUBLE LONG TURN TY

2 X 2 X 1-1/4 X 1-1/4 CXCXCXC CD DLT TY

2 X 2 X 1-1/2 X 1-1/2 CXCXCXC CD DLT TY

1-1/2 CXCXC LONG TURN CD TY

2 CXCXC LONG TURN CD TY

3X3X3X1-1/2 CXCXCXC SIDEOUT RH CD TY

3X3X3X1-1/2 CXCXCXC SIDEOUT LH CD TY

Subject Copper Pipe Fittings – DWV Y’s

1-1/4 CXCXC CD 45 Y*

1-1/2 CXCXC CD 45 Y*

1-1/2CX 1-1/4CX 1-1/4C CD 45 Y*

1-1/2CX 1-1/4CX 1-1/2C CD 45 Y*

1-1/2CX 1-1/2CX 1-1/4C CD 45 Y*

2 CXCXC 45 CD Y*

2CX 1-1/4CX 1-1/4C CD 45 Y*

2CX 1-1/4CX 1-1/2C CD 45 Y*

2CX 1-1/4CX 2C CD 45 Y*

2CX 1-1/2CX 1-1/4C CD 45 Y*

2CX 1-1/2CX 1-1/2C CD 45 Y*

2CX 1-1/2CX 2C CD 45 Y*

2CX 2CX 1-1/4C CD 45 Y*

2CX 2CX 1-1/2C CD 45 Y*

3 CXCXC CD 45 Y*

3C X 2C X 2C CD 45 Y*

3CX 3CX 1-1/4C CD 45 Y*

3CX 3CX 1-1/2C CD 45 Y*

3CX 3CX 2C CD 45 Y*

4 CXCXC CD 45 Y*

4CX 4CX 2C CD 45 Y*

4CX 4CX 3C CD 45 Y*

1-1/4 CXCXCXC CD 45 DOUBLE Y

1-1/2 CXCXCXC CD 45 DOUBLE Y

1-1/2 1-1/2 1-1/4 1-1/4 CXCXCXC CD DOUBLE Y

2 CXCXCXC CD 45 DOUBLE Y

2 X 2 X 1-1/4 X 1-1/4 CXCXCXC CD DOUBLE Y

2 X 2 X 1-1/2 X 1-1/2 CXCXCXC CD DOUBLE Y

3 CXCXCXC CD 45 DOUBLE Y

3 X 3 X 1-1/2 X 1-1/2 CXCXCXC CD DOUBLE Y

Subject Copper Pipe Fittings – Caps and Cleanouts

5 CP TUBE END CAP*

6 CP TUBE END CAP*

1-1/2 CXC/O CD TUBE END CLEANOUT*

3 CD CXC/O TUBE END CLEANOUT*

3 FTGXC/O CD CLEANOUT - FLUSH TYPE*

4 FTGXC/O CD CLEANOUT - FLUSH TYPE*

1-1/4 FTGXC/O CD CLEANOUT - FULL PLUG*

1-1/2 FTGXC/O CD CLEANOUT - FULL PLUG*

2 FTGXC/O CD CLEANOUT - FULL PLUG*

3 FTGXC/O CD CLEANOUT - FULL PLUG*

4 FTGXC/O CD CLEANOUT - FULL PLUG*

1-1/4 CXCXCO CD LINE CLEANOUT

1-1/2 CXCXCO CD LINE CLEANOUT

2 CXCXCO CD LINE CLEANOUT

3 CXCXCO CD LINE CLEANOUT

4 CXCXCO CD LINE CLEANOUT

1-1/2 CXCXCO CLEANOUT-FULL PLUG

2 CXCXCO CD CLEANOUT - FULL PLUG

3 CXCXCO CD CLEANOUT - FULL PLUG

1-1/4 CXCO WD TUBE END CLEANOUT*

1-1/2 CXCO WD TUBE END CLEANOUT*

2 CXCO WD TUBE END CLEANOUT*

3 CXCO WD TUBE END CLEANOUT*

1-1/4 WD FLUSH FTGXCO CLEANOUT*

1-1/2 FTGXCO WD CLEANOUT-FLUSH TYPE*

1-1/2 X 1 FTGXCO WD CLEANOUT - FLUSH*

2 FTGXCO WD CLEANOUT-FLUSH TYPE*

1-1/4 FTGXCO WD CLEANOUT FULL PLUG*

1-1/2 FTGXCO WD CLEANOUT FULL PLUG*

2 FTGXCO WD CLEANOUT FULL PLUG*

 

Case Number(s)

RR-2015-003

Attachment(s)

rr2p003_e.pdf (243.74 KB)

Status

Publication Date

Tuesday, March 22, 2016

Modification Date

Tuesday, March 22, 2016